1. The second generation of Hydraulic swing beam shearing machine.
2. Rack, blade frame is entire welded,vibration to eliminate inner
stress,to maintain good accuracy.
3. Use advanced integrate hydraulic system and good reliability.
4. Use three-point support rolling guide to eliminate the support
gap,improve cut quality.
5. The clearance between the blades adjusted by hand wheel
rapidly,accurancy and convenient.
6. Rectangular blade.four cutting edges, and loong service life.
7. Adjustable shearing angle to reduce deformation of the sheet.
8. The upper blade frame use introversion structure,easy for
blanking to improve the accuracy of production.
9. With the sub-shear function, motorized backgauge,digital
Cutting control system
1.The cutting times of this machining tool is displayed on a MD11-1
NC or Estun E10 NC and accurately show the cut after the block size
and number display.
2.The parallelism of the sheet to be cut off and the precision of
the shear size can be ensured. The cut stroke and cut times also
can be controlled.
3.Light alignment device eases drawing line for cutting, Standard
front support sheet frame, A set of standard blades
4.System uses a bladder-type hydraulic accumulator as an auxiliary
energy,absorb the pressure shock,the machine is running smooth,low
1.Adopt integrated hydraulic control system, more reliable and easy
2.Every complete working cycle can be achieved through the control
of hydraulic valve.
3.All seals in cylinder is imported,the most famous brand,good
quality and high performance
4.Overload overflow protection is outfitted to hydraulic
system,which can assure no leakage,and the oil level can be read or
1) Estun E21S control system
2) Powered Back Gauge X-Axis
3) DELTA inverter controlled back gauge
4) HIWIN ball screw and polished rod with 0.05mm accuracy
5) Squaring Arm and Front Support Arms
6) Germany BOSCH-REXROTH hydraulic valve
7) Germany SIEMENS main motor
8) Telemecanique/Schneider Electrics
9) Hydraulic & electrical overload protection
10) Cutting Line Illumination and Wire for Shadow Line Cutting
11) Top Blade with Two Cutting Edges and Bottom Blade with Four
2.Safe Equipment(CE & NR12)
1) Safety standard(2006/42/EC)
2) 1.EN 12622:2009 + A1:2013
3) 2.EN ISO 12100:2010
4) 3.EN 60204-1:2006 + A1:2009
5) Front finger protection(Safety light curtain)
6) South Korea KACON foot switch(Level 4 of safety)
7) Back Metal safe fence with CE standards
8) Safety relay with monitor the pedal switch & safety